Description
Programmable Forced Convection Oven
JSOF-Series Programmable Forced Convection Oven provides 10 Steps of temperature programming as well as constant temperature operation from ambient +10 °C to +250 °C for more versatile use. Circulation fan allows consistent temperature distribution for better temperature uniformity and/or faster heat up. Thus, this is suitable for application needs various temperature simulation with high accuracy and uniformity.
General Specifications
| Heating | Forced Air Convection |
| Temp. Range | ambient + 10 °C ~ 250 °C |
| Accuracy | ± 0.2 °C at 120 °C (JSOF-050) |
| Uniformity | ± 1.0 °C at 120 °C (JSOF-050) |
| Controller | JIC-CON 5th GEN Programmable PID Controller |
| Program | 1 Pattern, 10 Steps, 1 ~ 999 (or unlimited) times repreat |
| 3 Group Zone PID Temperature Control Algorithm | |
| Calibration | 3-Point Temperature Calibration |
| 1-Point Temperature Offset Calibration | |
| Sensor | Class A Pt-100 Ω Sensor |
| Safety | Over-Temperature Cut-Off |
| Over Current Cut-Off | |
| Material | Body – Epoxy Powder Coated Steel |
| Chamber – Stainless Steel 304 | |
| Insulation – 50mm thick woven mineral wool | |
| including Stainless Steel Wire Shelf | |
| optional Perforated Stainless Steel Shelf | |
| Electric | 220 ± 10% VAC 50 / 60Hz 1-Phase |
| Plug config. | CEE 7/7 Schuko or BS 1363 |
Reviews
There are no reviews yet.